Your Ad Here

Casio stuffs backlit CMOS sensors in Exilim EX-FC150 and EX-FH25 superzoom

Casio’s usual Exilim fare might struggle to engender a second look from the weary-eyed camera cognoscenti, but a few of the company’s models do feature an attention-grabbing 1,000fps shooting mode (albeit at a relatively useless 224 x 64 resolution). A pair of those speedy shooters, the EX-FC100 and EX-FH20, have today been ever so gently upgraded with a set of new name badges and mildly improved performance. The EX-FC150 ups the pixel count to ten million while adding a backlit CMOS sensor, but retains the 5x optical zoom, sensor-shift image stabilization, and general performance of the previous generation. The EX-FH25 20x superzoomer (pictured above) has a similar (if not identical) ten megapixel CMOS sensor, which upgrades the camera’s 40fps burst mode from seven to nine megapixel stills, and retains the 720p video recording at 30fps, something the FC150 can also boast. Both are coming out on November 27, though prices have yet to be announced. Hit the read link for the full dish.

[Via 1001 Noisy Cameras]

Filed under:

Casio stuffs backlit CMOS sensors in Exilim EX-FC150 and EX-FH25 superzoom originally appeared on Engadget on Mon, 16 Nov 2009 04:34:00 EST. Please see our terms for use of feeds.

Read | Permalink | Email this | Comments

  • Twitter
  • Facebook
  • email
  • PDF
  • Digg
  • del.icio.us
  • Google Bookmarks
  • RSS

This post is tagged: , , , , , , , , , , , , , , , , , , , ,

Leave a Reply





  • FCC thinks ISPs should do a wiser job preventing fraud, theftFCC thinks ISPs should do a wiser job preventing fraud, theft

    Internet fraud and theft are major problems, there appears little question about that -- in accordance with FCC chairman Julius Genachowski , some 8.4 million bank card numbers are stolen yearly. The question, then, is who ought to be addressing the problem. Genachowski this week called for "smart, practical, voluntary solutions," asking internet service providers to position more… »
  • Robot navigates, reassembles truss structuresRobot navigates, reassembles truss structures

    Sick and bored with your boring old truss? This useful little robot might be just the answer you are looking for. It might navigate a truss structure using its 3D-printed bi-directional gear innards, unscrew a beam with its rotational mechanism and reattach it, transforming the structure right into a new shape. The structure itself is specially designed for the bot, with robot lockable… »

Categories

Subscribe

Enter your email address: